Battery Reverse Connection Protection with Fuse Switch, Safer Installation
PF1.0, High Efficiency, Lower Consumption,Energy Conservation/ Environmental Protection/Electricity Saving/Cost Saving
Parallel Function Up to Maximum 9 Units: Enlarge More Loads
High Precision of Output Voltage,±5%, Take Care of Your Appliances
Communication Option: External WIFI, Supervise at Any Time
BMS function for lithium battery
Model | NXT-11000H | NXT-11000HP | |
Voltage Range | 90-280VAC±3V(Inverter Mode) 170-280VAC±3V(UPS Mode) | ||
Rated Output Power | 11000W | ||
Output Voltage(AC) | 220/230/240VAC±5% | ||
Output Frequency | 50/60Hz±0.1% | ||
Waveform | Pure sine wave | ||
Peak Power | 22000VA | ||
Overload Capacity(Battery Mode) | 21s@105%~150% Load 11s@150%~200% Load 400ms@>200% Load | ||
Grid connected Operation | Output Voltage | 220/230/240VAC | |
Grid Voltage Range | 195-253VA | ||
Output Current | 47.8A | ||
Peak Efficiency(Battery Model) | 98% | ||
Norminal Voltage | 48VDC | ||
Float Charging Voltage | 54VDC | ||
Max PV Input Power | 2*7500W | ||
MPPT Controller Voltage | 90-500VDC | ||
MAX PV Input Voltage | 500VDC | ||
MAX PV Charge Current | 150A | ||
MAX AC Charge Current | 150A | ||
MAX Charge Current | 150A | ||
RS232 | 5PIN/Pitch2.0mm | ||
Expansion Slot Communication Interface | 2×5PIN/Pitch2.54mm,Lithium battery BMS communication card、WIFI, etc | ||
Parallel Interface | Not Support Parallel | Max 9 parallel machipes | |
Operating Temperature | 0~40°C | ||
Humidity | 20%~95%(Non-condensing) | ||
Storage Temperature | -15~60℃ | ||
Noise(dB) | ≤50db | ||
L*W*H(mm) | 571*500*148mm |